Question: How do I get my CB radio to work?

Why is my CB radio not working?

Make sure your CB mic is plugged in securely. Check for breaks or damage to the plug and cord. Check the pins in the radio for damage as well. If it is a power mic or echo mic, make sure there is a battery in it!

What channel should my CB radio be on?

Any authorized CB radio frequency is open to all, but some have agreed-upon special purposes. For instance, channel 9 is for emergency use, and channel 19 is used by truckers to report on traffic conditions. Channel 19 is at the middle of the bands, thus has the best antenna efficiency.

Why can nobody hear me on my CB?

Ensure your mic gain is not turned down, or no one will hear you. 2. Ensure your radio is modulating when you talk into the mic. You can check this by looking at the radios meter; when you key up the needle will normally move to the right, and when you talk into the mic, it should move a little more.

How do I make sure my CB radio is working?

Check the in-line fuse on your CB radios power cord. If it is burned out, the radio will not turn on. If the radio is not directly connected to the power source, make sure the extension wire or fuse panel has a good connection to the power source. Also, ensure that the cars electric system is working properly.

Is there a way to test a CB antenna?

Using your multimeter, touch one of the probes to the metallic end of the antenna. For fiberglass antennas, this will usually be the tunable tip on the antennas end. For magnetic and center-loaded antennas, this will usually be a stainless steel whip.

Why does my Cobra 29 LX say antenna warning?

Check your antenna ground make sure that the antenna is grounded good,if you are using a mag mount some time these antennas dont make good ground this will cause the light to come on at times,and if not make sure that your antenna is grounded very well,1.3 swr is not that bad but i would try to get it a little lower

How do I tune my CB radio?

Turn the radio to channel 1. Key the microphone (depress the button and hold it). Turn the knob on the SWR meter labeled “SET” or “ADJUST” until the needle reaches the setting position at the end of its range. While still keying the microphone, flip the switch on the SWR meter to the “REF” or “SWR” position.

What band is CB?

The Citizens Band Radio Service (CBRS) is a private, two-way, short-distance voice communications service for personal or business activities of the general public. It also may be used for voice paging. It is authorized 40 channels between 26.965 MHz and 27.405 MHz.

What should my SWR reading be?

SWR Range Explanations: SWR 1.0-1.5: The ideal range! If your SWR is under 1.5, youre in great shape. If youre at 1.5 and really, really want to drop down to closer to 1 its likely possible to do with addition tuning, different equipment or a different mounting location.

How do you check if an antenna is working?

Touch one lead of the multimeter to the metal part of the antenna and touch the other lead to the metal core of the cable. The ohms reading should be zero. If the resistance is greater than that, the antenna or cable is damaged, which is preventing a signal from reaching the reception device.

How do you calibrate a CB antenna?

To properly calibrate your antenna you will need to find the balance for your lower frequencies and the higher ones.Connect the SWR meter to the antenna and the CB radio by twisting the end of the antennas cable onto the input on the SWR meter. Set the CB radio to channel 1 and switch the SWR meter to calibrate.More items

What does it mean when your Cobra CB says antenna warning?

If the antenna warning light now stays off, someone may have gone in and altered some of the filtering thats intended to make sure your radio is putting all its power onto the 27 MHz range, wherein lie the CB channels, so that its now putting out a lot of its energy on 54, 81, 108 MHz, etc.

What does it mean when your CB says CB antenna warning?

This alert that you are seeing is only supposed to basically come up on that screen if there antenna is not connected. There is a simple adjustment inside the radio. The component is a little potentiometer that has to be turned with a little tiny screw driver.

Can Baofeng talk to CB?

No, this works on different frequencies. CB is on rhe 11 meter band and the Baofeng UV-82 models are amateur/ham radios which are usually on 2 meter (144-147 mhz) and 70 cm (442-446 MHz) although the 82X is 33 cm (222-224 MHz) instead of 70 cm on the 2nd band. Classic CB is 27MHz / 11 meter band AM .

How far can a CB radio reach?

CB radios have a range of about 3 miles (4.8 km) to 20 miles (32 km) depending on terrain, for line of sight communication; however, various radio propagation conditions may intermittently allow communication over much greater distances.

Join us

Find us at the office

Adkin- Stees street no. 79, 76455 Moroni, Comoros

Give us a ring

Maloni Ronnau
+29 783 443 860
Mon - Fri, 9:00-21:00

Join us