Where should I point my external flash?

We typically position the flash at about 45 degrees and point it over our left or right shoulder. This produces nice soft directional light (as seen in the photos). Take a few test shots and adjust your flash as needed. You may need to adjust the power of the flash up or down depending on how bright the image is.

How do I connect an external flash?

Insert the external flash into the hot shoe on top of the camera. Once fully inserted, slide the mounting foot lock lever to lock it into place. Switch on the power supply of the camera, followed by that of the flash. Turn off the power of the flash before you attach or detach it from the hot shoe.

Where will you attach the flash unit of a camera?

The on-camera flash is an external flash unit or speedlight which can be attached via the hot shoe, which youll find on top of your camera. The flash is placed here as it will sit directly above the scene you are shooting, ensuring a wide coverage of light over your subject.

What attachment should you use on every kind of flash?

A flash diffuser is a simple light modifier that attaches to the upper part of an external flash unit. Its used to soften or spread the harsh, concentrated light that bursts out of the flash, creating a more even and flattering light on the subject.

How do you bounce flash outside at night?

Heres how to take awesome night portraits with off camera flashGet the focus right. Open the aperture. Slow the shutter speed. Raise the ISO. Use a low power speedlight. Diffuse the light. Move the light further away from the subject. Dont mix the lighting.More items •May 9, 2017

Should I use flash night photography?

The good news is that all exposure modes can and will be used in night photography. If your camera has a built-in flash, using Full Automatic mode may pop the flash and set your ISO for you. That is not always desired in night photography, but it can be in certain situations.

What can flash do when applied to night shots?

With the flash off, youll get a really blurry photo – because the camera needs a longer exposure time at night. Or with the flash turned on, the camera will restrict the shutter speed. And while your subject will be well-lit by the flash, the background will go black.

Should I use an external flash?

Although a built-in flash does not need to be carried around separately, it also has disadvantages such as insufficient flash power and ability to cast light only in the front direction. To produce more professional results, the use of an external flash is recommended.

Are Canon and Nikon flashes interchangeable?

Yes, it will work, or at least, its worked in the case Ive tried (canon flash on a nikon body). Youre right that the specific TTL metering and the like doesnt work, but the flash definitely triggers.

What is the difference between Ettl and TTL flash?

ETTL vs TTL Original TTL flashes read the exposure of the overall image straight from the cameras built-in exposure meter and set the flash strength off of that reading. By contrast, ETTL first fires a few flash bursts to read the exposure while the flash is lighting up the subject.