Question: What size is washing machine hookup?

Two standard hoses are connected from the back of the washing machine to the water supply valves. The hot and cold hoses are ¾ inches in diameter.

What size is a standard washing machine connector?

3/4 inch 3/4 inch BSP threaded connection (standard washing machine hose thread).

What size should washing machine drain pipe be?

1-1/2 The drain pipe should be a minimum of 1-1/2 I.D. (inside diameter) to ensure proper draining. The washer drain hose is a 1-1/4 O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing must be a minimum of 30 high for Top Load washers.

Are all washing machine pipes the same size?

All washing machines should use standard sizes and fittings. But there are variances in design across different manufacturers and a few potential problems as discussed in this article. You will always get new fill hoses with a new washing machine.

Is washing machine hookup same as garden hose?

Its simple, and if you dont already have the parts you need, theyre inexpensive and easy to obtain. The couplings used on washing machine hoses are essentially the same couplings used on an average garden hose, insofar as the threads used to screw the hose onto the washing machine are the same on both.

How do you fit a washing machine waste pipe?

3:347:43new washing machine plumbing installation water supply and wasteYouTube

Are washing machine drain hoses a standard size?

Most washing machines have a drain hose between 1 and 1 1/2 inches wide.

Can you hook a washer up to a garden hose?

A garden hose has an interior diameter that is smaller than a washing machine hose, so hooking it up directly you would be risking pump burnout (there would be more friction and work on the machine).

Do I need a standpipe for washing machine?

Most washing machines require a standpipe with a height of at least 36 inches. Check your manual to find out the requirements for your particular unit, and ensure your standpipe meets this minimum requirement. Placing your standpipe too low or too high can cause backflow and overflow.

Can a washing machine and dishwasher share a waste pipe?

To add a second waste (washing machine) to the existing one (sink), a spigot connection is typically required which will mean that the pipework originally taking one incoming pipe is now able to take two.

Can I put a washing machine outside?

While most washing machines have built-in features to withstand the elements of the outdoors, exposing them to sun and rain may lower their lifespan – or at the very least deteriorate their looks. So, yes, you can out your washing machine outside, but it is hardly ideal.

Join us

Find us at the office

Adkin- Stees street no. 79, 76455 Moroni, Comoros

Give us a ring

Maloni Ronnau
+29 783 443 860
Mon - Fri, 9:00-21:00

Join us