If we were to dissect the Aux Cable, there would be three wires - a ground cable (usually black or a shielded wire), a right signal cable (usually red) and a left signal cable (usually white or yellow).

What are the wires in an aux cord?

Red usually means right and green or blue means left. These are the wires that carry the audio. The other two wires carry the ground. With a four-wire system, its important to make sure the grounds are connected to the correct ground.

Why do aux cables have 3 rings?

One ring means mono playback. This basic plug only delivers one channel of sound to both the left and right earbud. Two rings mean stereo. Three separating rings means youve got two stereo pins, and a microphone pin as well, and is the one youre most likely to run into when youre looking at smartphone earbuds.

How do I connect AUX wire to speaker wire?

How to - Speakers - Play via AUX InputInsert one end of the AUX cable into the AUX input on the bottom of your speaker.Insert the other end of the AUX cable into the AUX output port on your audio device.Turn the SOURCE knob to AUX, then push once to activate.

How do you wire a 3 wire headphone jack?

1:443:15How to Wire a 3.5mm Stereo Audio Plug : Audio Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide. Then well slaughter the ring connection which is the right side. After you have these threeMoreSide. Then well slaughter the ring connection which is the right side. After you have these three connections on one side go ahead and do that to the other side on the other 3.5 millimeter plug.

Can I make aux cable at home?

How to Make Aux Cable at HomeStep 1: Take All Components As Shown Below. Components required - Step 2: This Is the Pin Outs of Audio Jack. Step 3: Remove Outer Cover. Step 4: Solder Wires in Audio Jack. Step 5: Solder Wires in Other Audio Jack. Step 6: Add Glue to the Audio Jack. Step 7: Aux Cable Is Ready.

How does an aux jack work?

Aux input in modern sense is a 1/8 inch Stereo jack that is used to connect a personal listening device or phone to an amplifier which then powers speakers. The voltage level is about 0.3 to 0.5 volts which is also typical headphone level.

How do I know if I have 3.5 mm jack?

The Size Difference. The most obvious difference between 2.5mm, 3.5mm and 6.35mm headphone jacks is in the name itself: the size of the jack and its associated plug.

How many wires does a headphone jack have?

Wires in the Cable Most audio cables and headphones have three or four wires running through them: a red one, a green/blue one, and a bare/copper one.

How do you wire up a headphone jack?

After you cut open the plastic insulating sheath youll find 5 separate wires:Solid red wire: right audio channel signal.Red and copper twisted wire: ground for the right audio channel.Solid green wire: left audio channel signal.Green and copper twisted wire: ground for the left audio channel.More items

What can I use instead of an aux cord?

FM Transmitter — Under $20 An FM transmitter plugs into your cigarette lighter socket and connects to your device via an aux cord or Bluetooth. The transmitter broadcasts whats playing from your phone over a short FM frequency to which you tune your cars radio and receive.